Logic board update

Lots of movement on the logic board today.

Instead of printing and assembling 16+ LED boards plus a logic board, why not just put it together (like PB&J) onto one board? Then I only need to attach one PCB to the enclosure, and the less things I need to do myself, the better.

Below you can see a Fritzing printout taped to a 1/2″ piece of foamcore inside a prototype enclosure. I expect that the base will be thicker in order to house more stuff, and by stuff I mean at least a battery and charging mechanism, and so that I can hold the Lamp without touching the glass.

IMG_7413

As I was showing this around the office, a gauntlet was thrown down: why use an Arduino Uno r3 when I could use a smaller version without any penalty in processing or functionality, with the added gift of miniaturizing the stack? I didn’t have an answer to this, except, “Umm.”

So challenge accepted!

BigRound+LED+MINI-2_pcbI have now integrated an Arduino Pro Mini 5v into the PCB stack. I also added some power flexibility by adding a power mounting block and an external 5v voltage regulator, even though the Pro Mini can accept up to 12VDC and has a built-in voltage regulator. I wanted to split out that function so that the Arduino doesn’t have to do any additional work. Also, I don’t know exactly how much power the main light will take, and I want some headroom to attach the largest battery I can safely source.

You might remember, dear reader, that I originally started this experiment using an Arduino Pro Mini 3v3 board (oh how we go round the bend again). I decided against reusing the 3v3 board because the GPS module which I found to be most stable needs 5v and I don’t want to go around shifting voltage where I don’t need to. I’m all about reducing complexity now.

With that in mind, I am certainly thinking about removing IC3 & IC4; IC1 & 2 run the 16 compass LEDs, while IC3 & 4 are two additional shift registers  which are legacies from my original idea to build my own LED lighting array. I am now considering using an LED string such as this one sold by Adafruit or a single point source I can vary in intensity (yet to be sourced). Moving my main power supply from a 3v3/5v LiPoly source to a high voltage battery would open up more lighting sources I could use efficiently.

Adafruit and Sparkfun orders placed, let’s play with it when they arrive.